Footwear TPU – Grade Portfolio
| Kopo | Hardness Range | Thepa ea Bohlokoa | Mephato e sisintsweng |
| Midsoles / E-TPU Foaming | 45A–75A | Boima bo bobebe, bo matla bo phahameng, matla a khutlang, cushioning e bonolo | Foam-TPU 60A, E-TPU Lifaha 70A |
| Li-insoles le li-cushion pads | 60A–85A | Ho tenyetseha, ho ama ha bonolo, ho monya ho ts'oha, ts'ebetso e ntle | Sole-Flex 70A, Insole-TPU 80A |
| Li-outsoles (tse entsoeng ka ente) | 85A–95A (≈30–40D) | Khanyetso e phahameng ea abrasion, ho tšoarella, ho hanyetsa hydrolysis | Sole-Tough 90A, Sole-Tough 95A |
| Polokeho / Lieta tsa Lieta tsa Mosebetsi | 90A–98A (≈35–45D) | E thata haholo, e sehiloeng le e sa senyeheng, bophelo bo bolelele ba ts'ebeletso | Work-Sole 95A, Work-Sole 40D |
| Lifilimi tsa TPU le Likahokelo (Ka holimo) | 70A–90A | Lifilimi tse tšesaane, tse sa keneleng metsi, tse khabisitsoeng, li tlamahanngoa le lesela | Shoe-Film 75A TR, Shoe-Film 85A |
TPU ea lieta - Leqephe la Lintlha tsa Kereiti
| Kereiti | Boemo/ Boemo | Boima ba 'mele (g/cm³) | Ho thatafala (Shore A/D) | Tensile (MPa) | Elongation (%) | Ho lla (kN/m) | Abrasion (mm³) |
| Foam-TPU 60A | Li-midsoles tsa E-TPU tse foamed, tse bobebe le tse khutlang hape | 1.15 | 60A | 15 | 550 | 45 | 40 |
| E-TPU Lifaha 70A | Lifaha tse foamed, lieta tse mathang tse sebetsang hantle haholo | 1.12 | 70A | 18 | 500 | 50 | 35 |
| Insole-TPU 80A | Li-insoles le li-cushion pads, li bonolo ebile li phutholohile | 1.18 | 80A | 20 | 480 | 55 | 35 |
| Sole-Tough 90A | Li-outsoles (ente), abrasion & hydrolysis resistant | 1.20 | 90A (~30D) | 28 | 420 | 70 | 25 |
| Sole-Tough 95A | Li-outsoles tse apereng haholo bakeng sa lipapali le lieta tse tloaelehileng | 1.22 | 95A (~40D) | 32 | 380 | 80 | 20 |
| Mosebetsi-Sole 40D | Tšireletseho / lieta tsa liindasteri, boima bo phahameng & khanyetso ea ho khaola | 1.23 | 40D | 35 | 350 | 85 | 18 |
| Lieta-Filimi 75A TR | Filimi ea TPU bakeng sa matlafatso e kaholimo le ho thibela metsi (khetho e pepeneneng) | 1.17 | 75A | 22 | 450 | 55 | 30 |
| Filimi ea Lieta 85A | Filimi ea TPU bakeng sa ho koaheloa le ho khabisa ka holimo | 1.18 | 85A | 25 | 420 | 60 | 28 |
Hlokomela:Lintlha tsa litšupiso feela. Litlhaloso tse ikhethileng lia fumaneha.
Likarolo tsa Bohlokoa
- Abrasion e ikhethang le khanyetso ea ho roala bakeng sa soles e tšoarellang nako e telele
- Elasticity e phahameng le botsitso bakeng sa cushion e betere le ho khutla ha matla
- Sebaka sa ho thatafala ha lebopo:70A–98A(ho koahela li-midsoles ho li-outsoles tse tšoarellang)
- Hydrolysis le ho hanyetsa mofufutso bakeng sa maemo a leholimo a tropike
- E fumaneha ka limaraka tse bonaletsang, tse matte, kapa tse mebala
Lisebelisoa tse Tloaelehileng
- Lieta tsa lieta (li-outsoles tse kentsoeng ka kotloloho le li-midsoles)
- Li-midsoles tse foamed (lifaha tsa E-TPU) bakeng sa lieta tse sebetsang hantle
- Li-insoles le likarolo tsa cushioning
- Lifilimi tsa TPU le li-overlays tsa holimo (matlafatsa, ho thibela metsi, mokhabiso)
Dikgetho tsa ho itlhophisa
- Boima: Shore 70A–98A
- Mephato bakeng sa ho bopa ente, extrusion, le foaming
- Limaraka tse foamed bakeng sa lits'ebetso tsa E-TPU
- Mebala e ikhethileng, liphetho le litlamorao tsa bokaholimo
Hobaneng o Khetha TPU ea Maoto ho Chemdo?
- Phepelo ea nako e telele ho li-hubs tse kholo tsa lieta hoVietnam, Indonesia le India
- Likamano tse tsitsitseng le lifeme tsa lehae tsa lieta le li-OEM
- Ts'ehetso ea tekheniki bakeng sa ts'ebetso ea ho foaming le ente
- Litheko tsa tlholisano le boleng bo ts'oanang
