HDPE HXM50100

Tlhaloso e Khutšoanyane:

Marlex Brand

HDPE| Fokotsa Molding

E entsoe United States

Theko:1000-1200 USD/MT

Boema-kepe:Huangpu / Ningbo / Shanghai / Qingdao

MOQ:1 * 40GP

Nomoro ea CAS:9002-88-4

Khoutu ea HS:3901200099

Tefo:TT/LC

Re romelle lengolo-tsoibila Khoasolla joalo ka PDF

Lintlha tsa Sehlahisoa

Tlhaloso

• Matla a qhibilihisang hantle
• Ho thatafala hantle
• ESCR e ikhethang
• E babatsehang matla a tšusumetso ea mocheso o tlaase
• Ho tšoarella

Lisebelisoa

E sebelisoa haholo ka har'a lijana tsa Thomello, likoti tsa Jerry, Lijana tsa Fuel, litanka tsa lik'hemik'hale tsa Temo, Pallets, Dunnage ea Likoloi, Libethe tsa literaka, Lisebelisoa tsa lebala la lipapali.

Litlhaloso

• ASTM D4976 - PE 235
• FDA 21 CFR 177.1520(c) 3.2a, sebelisa maemo a B ho ea ho H ho ea ka Lethathamo la 2 la 21 CFR 176.170(c)
• Karete e mosehla ea UL94HB ka faele ea UL E349283
• NSF Standard 61 bakeng sa metsi a nooang
• E thathamisitsoe ho File Master Master File

LEBITSO MONATE	Senyesemane	SI	Mokhoa
Botenya	-	0.948 g/cm³	ASTM D1505
Sekhahla sa Phallo (HLMI, 190 °C/21.6 kg)	-	10.0 g/10 mets	ASTM D1238
Tensile Strength at Yield, 2 in/min, Type IV bar	3,600 psi	25 MPa	ASTM D638
Elongation ka Break, 2 in/min, Type IV bar	700%	700%	ASTM D638
Flexural Modulus, Tangent - 16:1 span: botebo, 0.5 ho/min	175,000 psi	1,200 MPa	ASTM D790
ESCR, Boemo B (100 % Igepal), F50	> 1,000 h	> 1,000 h	ASTM D1693
Durometer Hardness, Type D (Shore D)	68	68	ASTM D2240
Vicat Softening Temperature, Loading 1, Rate A	258 °F	126 °C	ASTM D1525
Mocheso oa ho Fetola Mocheso, 66 psi, Mokhoa oa A	173 °F	78 °C	ASTM D648
Mocheso oa Brittleness, Mofuta oa A, Mohlala oa Mofuta oa I	<-103 °F	-75 °C	ASTM D746
Tensile Impact, Mofuta oa S bar	90 ft•lb/in2	190 kJ/m²	ASTM D1822