HDPE HHMTR-144

Tlhaloso e Khutšoanyane:

Marlex Brand
HDPE| Filimi
E entsoe Saudi Arabia

Theko :1100-1600 USD/MT

Boema-kepe:Xingang, Qingdao, Shanghai, Ningbo

MOQ:17MT

Nomoro ea CAS:9003-53-6

Khoutu ea HS:390311

Tefo :TT, LC

Re romelle lengolo-tsoibila Khoasolla joalo ka PDF

Lintlha tsa Sehlahisoa

Lisebelisoa

•Ho thatafala le ho tšoarella

•Tshebetso e ntle

•Litšobotsi tse ntle tsa ho kopanya le li-resin tsa HDPE HMW

Lisebelisoa tse tloaelehileng tsa HHM TR-144 li kenyelletsa:

•Mekotla ea T-shirt

•Multi-wall liner

•Mekotla ea lithōle

Resin ena e kopana le lintlha tsena:

•FDA 21 CFR 177.1520(c) 3.2a

•EU No. 10/2011

Bakeng sa Leqephe la Boitsebiso ba Tšireletso ea Material (MSDS), etela sebaka sa rona sa marang-rang ho www.saudipolymers.com

Nominal Resin Properties	Boleng (SI Units)	Mokhoa
Botenya	0.946 g/cm3	ASTM D1505
Melt Index, Boemo 190 ° C / 2.16 lik'hilograma	0.18 g/10 mets	ASTM D1238
Brittleness Temperature, Type A clamp, Type I specimen	<-75°C	ASTM D746
ESCR, Boemo B (100% Igepal), F50	> 1000 hrs	ASTM D1693
Flexural Modulus, Tangent - 16:1 span: botebo, 12.7 mm/min	1150 MPa	ASTM D790
Lerotholi la Lerata (66cm)	90 g	ASTM D1709
Matla a Tensile ho Kotulo, 50.8 mm/min MD	24 MPa	ASTM D882
Matla a ho Tepella ha ho Hlaha, 50.8 mm/min TD	26 MPa	ASTM D882
Elongation at Break, 50.8 mm/min MD	480%	ASTM D882
Elongation nakong ea Phomolo, 50.8 mm/min TD	640%	ASTM D882
Elmendorf Tear Strength, MD	19 g	ASTM D1922
Elmendorf Tear Strength, TD	270 g	ASTM D1922

1. Thepa ea mabitso e tlalehiloeng mona ke e tloaelehileng ea sehlahisoa, empa ha e bontše phapang e tloaelehileng ea tlhahlobo, ka hona, ha ea lokela ho sebelisetsoa merero e khethehileng. Litekanyetso li pota-potiloe.

2. Thepa ea 'mele e ile ea khethoa ho mehlala e entsoeng ka khatello e entsoeng ho latela Mokhoa oa C oa ASTM D4703, Annex A1.

3. E itšetlehile ka filimi ea 0.025 mm e hlahisoang ka karolelano ea 4: 1 ea ho phatloha.

E fetileng: HDPE P6006

E 'ngoe: HDPE 23050