• hlooho_banner_01

HDPE P6006

Tlhaloso e Khutšoanyane:

Sabic Brand
HDPE| PE100 E Ntšo
E entsoe Saudi Arabia


  • Theko :1100-1600 USD/MT
  • Boema-kepe:Xingang, Qingdao, Shanghai, Ningbo
  • MOQ:17MT
  • Nomoro ea CAS:9003-53-6
  • Khoutu ea HS:390311
  • Tefo :TT, LC
  • Lintlha tsa Sehlahisoa

    Tlhaloso

    FDA 21 CFR 177.1520(c) 3.2a. Resin e ka sebelisoa ha e kopana le mefuta eohle ea lijo joalokaha e hlalositsoe ho Lethathamo la 1, 21 CFR 176.170 (c) le maemong a ho sebelisoa BH joalokaha ho hlalositsoe ho Lethathamo la 2, 21 CFR 176.170 (c).

    Lisebelisoa

    Ena bimodal phahameng molek'hule boima, phahameng segokanyipalopolyethylene (HMW-HDPE) ethylene-hexene copolymer keE etselitsoe bakeng sa lits'ebetso tsa lifilimi tse fokang tse hlokang:

    • Molemo bubble botsitso le filimi drawdown
    • Matla a tšusumetso e phahameng le ho tiea
    • Ho tiea ho hoholo le matla a ho tsitsa
    • Matla a ho lla a leka-lekaneng

    Litlhahiso tse tloaelehileng tsa lifilimi li kenyelletsa:
    • • Mekotla ea T-shirt
    • • Hlahisa mekotla
    • • Mekotla ea thepa
    • • Li-liner tsa indasteri
    • • Li-liner tsa moqomo oa lithōle
    Nominal Blown Film Properties ho 0.5 mil1 Senyesemane SI Mokhoa
    Dart 260 g/mil 100 N/mm ASTM D1709
    Elmendorf Tear MD 15 g/mil 6 N/mm ASTM D1922
    Elmendorf Tear TD 450 g/mil 174 N/mm ASTM D1922
    Matla a Tensile ho Break MD 13,000 psi 90 MPa ASTM D882
    Matla a Tensile ho Break TD 6,000 psi 41 MPa ASTM D882
    Tensile Elongation at Break MD 260% 260% ASTM D882
    Tensile Elongation at Break TD 570% 570% ASTM D882
    1 % Secant Modulus MD 120,000 psi 827 MPa ASTM D882
    1 % Secant Modulus TD 140,000 psi 965 MPa ASTM D882

     

    Filimi ea 0.5 mil (12.7 micron) e hlahisoang ho sebelisoa extruder-feed-feed ka sekhahla sa 225 lb / h e nang le lehlaka le bolelele ba 7 x Die Diameter, 4: 1 Blow-Up Ratio (BUR), bophara ba 6 inch le lekhalo la 0.040 inch die. Thepa ea mabitso e tlalehiloeng mona e emela sehlahisoa tlas'a maemo ana a ts'ebetso, le hoja thepa ea filimi e ka fapana ho ea ka maemo a khethehileng a ho letsa filimi. Ka hona, data ha ea lokela ho sebelisoa bakeng sa merero e khethehileng.
    Pele o sebelisa sehlahisoa sena, mosebelisi o eletsoa le ho hlokomelisoa ho iketsetsa qeto le tlhahlobo ea polokeho le polokeho.ho tshwaneleha ha sehlahiswa bakeng sa tshebediso e ikgethileng eo ho buuwang ka yona mme e eletswa hape kgahlanong le ho itshetleha hodima tlhahisoleseding e fuperoengmona kaha e ka amana le ts'ebeliso efe kapa efe e itseng. Ke boikarabello ba ho qetela ba mosebelisi ho netefatsa hore sehlahisoa see loketse mme tlhahisoleseling e sebetsa ts'ebelisong e ikhethileng ea mosebelisi. Chevron Phillips Chemical Company LP ha eetsa, le ho hana ka ho hlaka, litiisetso tsohle, ho kenyeletsoa le litiisetso tsa thekiso kapa ho lekana bakeng sa morero o itseng,ho sa tsotelehe hore na ke ka molomo kapa ka ho ngoloa, ho hlalositsoe kapa ho boleloa, kapa ho thoe e bakoa ke tšebeliso efe kapa efe ea khoebo kapa mokhoa ofe kapa ofe oae sebetsanang le tshebediso ya tlhahisoleseding e teng mona kapa sehlahisoa ka bosona. Mosebedisi o nka ka ho hlaka kotsi yohlele melato, e ka ba e ipapisitse le konteraka, tort kapa ho seng joalo, mabapi le ts'ebeliso ea tlhaiso-leseling e fanoeng mona kapasehlahisoa ka bosona. Ho feta moo, tlhahisoleseling e fanoeng mona e fanoe ntle le ho bua ka litaba tsa thepa ea mahlale, hapejoalo kamelao ea mmuso, ea naha kapa ea lehae e ka khahlanoang le ts'ebeliso ea eona. Lipotso tse joalo li lokela ho batlisisoa ke mosebelisi.

  • E fetileng:
  • E 'ngoe: